Can I Find A Diamond Engagement Ring For Less Than $3000?

Today’s challenge was:

Can I find a diamond engagement ring for less than $3000?

I wanted to find a good quality diamond without going for inferior and poorly cut diamonds. It had to be a nice “sparkler“.

For this I applied a wider filter which involved looking through diamonds with a slightly higher coloring, like a K.

It is advisable to have K diamonds placed in a yellow gold setting. More about this below.

 

Shape: Round
Carat Weight: 0.76
Cut: Hearts & Arrows Ideal
Color: K
Clarity: VS2
Certificate: AGS
(with Computer Generated Light Performance Map!)

Depth: 61.9%
Table: 58.2%
Polish: Ideal
Symmetry: Ideal
Culet: None
Fluorescence: Negligible
Measurements: 5.82 mm x 5.85 mm x 3.61 mm
Crown Angle: 35.6
Crown %:
Pavilion Angle: 40.7
Pavilion %:

This particular Heart and Arrows Ideal cut diamond would be ideal for anyone who would prefer a yellow gold ring setting. This is because the color of this diamond has been grade by AGS laboratory as being a 3.5 which in the more familiar GIA color grade is “K”.  Yes, it is a little farther down on the color scale. Which is why it is often suggested that diamonds of this color be set in yellow gold. The yellow color of the gold creates a contrast and makes the slight coloring of this diamond less noticeable. With such perfect symmetry and polish the diamond will have a very high “sparkle” (technically called fire and brilliance), also reducing the notice-ability of the slight coloring. The VS2 grade makes this diamond almost completely perfect in regards to inclusions. As you can see from the image no inclusions are visible. And the grading report (certificate) indicates where the inclusions are to be found, so you know where to look for them. You still can’t see them even if you are looking for them.

This diamond is a good size for an engagement ring. Anything over half a carat will do, though most people try to get as close to 1 carat as possible.

 

Looking at the Computer Generated Light Performance Map not only tells us that this diamond has the highest grade of light performance, but also confirms the incredible symmetry.

At $2,550.00 I can guarantee that this diamond is going to be very well liked once you have it in your hands.

You may click here if you would like to buy it: https://www.jamesallen.com/diamonds/K-VS2-Ideal-Cut-Round-Diamond-1495907.asp

Here’s what it would look like in a yellow gold ring setting.

The engagement ring in the video is made of 18 karat gold. This is quite pure gold, with 18 parts out of 24 being pure gold, and the rest other metals/alloys. Since pure gold is quite soft it might be prudent to get 14 karat gold which is not as soft as 18 k gold and will do a better job of holding the diamond in place.

Here is a link to a 14 karat gold setting: https://www.jamesallen.com/engagement-rings/solitaire/14k-yellow-gold-2mm-knife-edge-solitaire-engagement-ring-(six-prong)-17927y14.html

Enhanced by Zemanta